https://kb.in2net.net en-us https://kb.in2net.net ActiveKB NX enochfai@in2net.com Mon, 14 Sep 2026 03:32:17 PDT 20 https://kb.in2net.net/questions/517/ After you have booted your Server from Recovery Boot CD, and configured the network. You will start up Backup Agent on the Recovery Boot CD.At the command prompt, enter the following command. /e ... In2net Data Protection Service Fri, 30 Aug 2013 17:20:01 GMT https://kb.in2net.net/questions/477/ After the boot from Live CD, you may need to configure the network settings. 1. If you have a DHCP server in your network, then the network is probably already configured. Type ifconfig eth0 and p ... In2net Data Protection Service Fri, 30 Aug 2013 17:19:28 GMT https://kb.in2net.net/questions/476/ To perform a bare metal restore, you need to download an appropriate software from the Download Area on our website. Click here to go to our Download Area.Click on Download for Live CD Boot Media ... In2net Data Protection Service Fri, 30 Aug 2013 17:17:13 GMT https://kb.in2net.net/questions/474/ Bare Metal Restore(BMR) is the process of reformatting a server from scratch after a catastrophic failure. In conventional methods, the process typically involves reinstalling the operating system ... In2net Data Protection Service Fri, 30 Aug 2013 17:14:04 GMT https://kb.in2net.net/questions/478/ After booting the bare metal live CD with Backup Agent running, and the network has been configured properly, you may now use your internet browser to access the Backup manager.1. Click on "Recove ... In2net Data Protection Service Fri, 30 Aug 2013 17:10:58 GMT